Delta 4Ax-602804-xHxx Manual do Utilizador descarregar pdf (Página 13)

MACRO-CPU Hardware Reference

ACC-Ux “UBUS” backplane board. It can also be used to bring in 5V power, and optionally +/-15V power, from

a backplane or breakout board, to the entire MACRO Station.

Note

When interfacing to accessory boards across the UBUS backplane, it is strongly recommended to

use a new revision (-105 or higher) of the MACRO CPU board, and an ACC-Ux backplane board

(not an older ACC-Jx backplane board). The newer revision MACRO CPU boards have stronger

bus driver ICs, but they do not work well with the termination of the ACC-Jx backplane boards.

Power Terminal Block: The TB1 4-point terminal block can be used to bring in 5V power, and optionally

+/-15V power, to the entire MACRO Station. In a UMAC (pack) configuration, the power is more likely to be

brought in through the backplane.

3U MACRO CPU Board Hardware Setup

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 34 35

Sem comentários

Delta 4Ax-602804-xHxx Manual do Utilizador Página 13