Delta RMC70 Manual do Utilizador descarregar pdf (Página 15)

Step 8: Test an Actuator

deltamotion.com 13

Step 8: Test an Actuator

You will now test an actuator such as a hydraulic valve or a motor. You

will use the Direct Output command to send a voltage to the actuator.

The actuator must already have been wired to the RMC.

1. Check the machine and make sure that the axis may safely move

in both directions.

2. In the Project tree, double-click

Axis Tools.

3. In the Axis Status Registers, on

the Basic tab, look at the

Control Output.

It should be 0.

5. In the Command Tool, in the axis the actuator is connected to,

click the button.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Sem comentários

Delta RMC70 Manual do Utilizador Página 15