Delta 34-814 Manual de Instruções descarregar pdf (Página 23)

CONSTRUCTING A FEATHERBOARD

Fig. 74, illustrates dimensions for making a typical featherboard. The material which the featherboard is constructed

of, should be a straight piece of wood that is free of knots and cracks. Featherboards are used to keep the work in

contact with the fence and table and help prevent kickbacks. Clamp the featherboards to the fence and table so that

the leading edge of the featherboards will support the workpiece until the cut is completed. Use featherboards for all

non “thru-sawing” operations where the guar

d and spreader assembly must be removed (see Fig. 75). Always r

eplace

the guar

d and spreader assembly when the non thru-sawing operation is completed.

Fig. 74

Fig. 75

Kerf should be

about 1/4" apart.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Sem comentários

Delta 34-814 Manual de Instruções Página 23