Delta MS210 Manual do Utilizador descarregar pdf (Página 13)

MS210

MS210 DS004 www.mshinetek.com

- 13 -

The above information is the exclusive intellectual property of M-Shine Technologies Corporation and shall not be disclosed, distributed without permission

rom M-

hine.

Manual Reset

TEST

BEEPEN

Manual Reset

TEST

BEEPEN

If BEEP is required for normal

Operations.

If BEEP not is required for

normal Operations.

Figure 5. Manual Reset.

If normal operations do not “BEEP”, BEEPEN may short to GND constantly, and use TEST pin as the reset

pin.

Used SPI Commands

The SPI flash connected must support the following commands:

COMMAND NAME COMMAND

CODE

DESCRIPTION

JEDEC ID 9FH Read the standard size information.

MS210 Checks the 3

byte reply of command 9F as its size

code. The mapping is as below:

Command 0x9F reply 3

byte

Size

0x10 512K Bits

0x11 1M Bits

0x12 2M Bits

0x13 4M Bits

0x14 8M Bits

0x15 16M Bits

0x16 32M Bits

0x17

64M Bits

DS release ABH Read the signature or release from the deep sleep mode.

Read Status

05H Read the 8-bit register to know if busy.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 34 35

Comentários a estes Manuais

Sem comentários

Delta MS210 Manual do Utilizador Página 13

Comentários a estes Manuais

Manuais e produtos relacionados com Serras circulares Delta MS210