Delta AP300 Manual do Utilizador Página 6
- Página / 36
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
6
A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should
be protected with a 20 Amp time lag fuse. If an extension cord is used, use only 3-wire extension cords which have 3-
prong grounding type plugs and matching receptacle which will accept the machine’s plug. Before connecting the
machine to the power line, make sure the switch (s) is in the “OFF” position and be sure that the electric current is of
the same characteristics as indicated on the machine. All line connections should make good contact. Running on low
voltage will damage the machine.
DO NOT EXPOSE THE MACHINE TO RAIN OR OPERATE THE MACHINE IN DAMP LOCATIONS.
GROUNDED OUTLET BOX
CURRENT
CARRYING
PRONGS
GROUNDING BLADE
IS LONGEST OF THE 3 BLADES
GROUNDED OUTLET BOX
GROUNDING
MEANS
ADAPTER
2. Grounded, cord-connected machines intended for
use on a supply circuit having a nominal rating less
than 150 volts:
If the machine is intended for use on a circuit that has an
outlet that looks like the one illustrated in Fig. A, the
machine will have a grounding plug that looks like the plug
illustrated in Fig. A. A temporary adapter, which looks like
the adapter illustrated in Fig. B, may be used to connect
this plug to a matching 2-conductor receptacle as shown
in Fig. B if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly
grounded outlet can be installed by a qualified electrician.
The green-colored rigid ear, lug, and the like, extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box. Whenever
the adapter is used, it must be held in place with a metal
screw.
NOTE: In Canada, the use of a temporary adapter is not
permitted by the Canadian Electric Code.
IN ALL CASES, MAKE CERTAIN THE
RECEPTACLE IN QUESTION IS PROPERLY
GROUNDED. IF YOU ARE NOT SURE HAVE A
QUALIFIED ELECTRICIAN CHECK THE RECEPTACLE.
1. All grounded, cord-connected machines:
In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electric current to
reduce the risk of electric shock. This machine is
equipped with an electric cord having an equipment-
grounding conductor and a grounding plug. The plug must
be plugged into a matching outlet that is properly installed
and grounded in accordance with all local codes and
ordinances.
Do not modify the plug provided - if it will not fit the outlet,
have the proper outlet installed by a qualified electrician.
Improper connection of the equipment-grounding
conductor can result in risk of electric shock. The
conductor with insulation having an outer surface that is
green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the
electric cord or plug is necessary, do not connect the
equipment-grounding conductor to a live terminal.
Check with a qualified electrician or service personnel if
the grounding instructions are not completely
understood, or if in doubt as to whether the machine is
properly grounded.
Use only 3-wire extension cords that have 3-prong
grounding type plugs and matching 3-conductor
receptacles that accept the machine’s plug, as shown in
Fig. A.
Repair or replace damaged or worn cord immediately.
POWER CONNECTIONS
MOTOR SPECIFICATIONS
Your machine is wired for 120 volts, 60 HZ alternating current. Before connecting the machine to the power source,
make sure the switch is in the “OFF” position.
GROUNDING INSTRUCTIONS
THIS MACHINE MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM
ELECTRIC SHOCK.
- Portable Single-Stage 1
- Dust Collector 1
- TABLE OF CONTENTS 2
- IMPORTANT SAFETY INSTRUCTIONS 2
- CALIFORNIA PROPOSITION 65 3
- GENERAL SAFETY RULES 4
- SAVE THESE INSTRUCTIONS 5
- Refer to them often 5
- POWER CONNECTIONS 6
- MOTOR SPECIFICATIONS 6
- GROUNDING INSTRUCTIONS 6
- EXTENSION CORDS 7
- CARTON CONTENTS 8
- FUNCTIONAL DESCRIPTION 8
- ASSEMBLY 9
- DUST PORT TUBE AND 10
- CONNECTOR TO DUST COLLECTOR 10
- VACUUM HOSE TO 12
- DUST COLLECTOR 12
- DUST BAG TO DUST COLLECTOR 13
- OPERATION 14
- MACHINE USE 15
- TROUBLESHOOTING 16
- MAINTENANCE 17
- ACCESSORIES 18
- WARRANTY 18
- Etapa Sencilla 19
- PROPOSICIÓN DE CALIFORNIA 65 20
- NORMAS GENERALES DE SEGURIDAD 21
- GUARDE ESTAS INSTRUCCIONES 22
- ESPECIFICACIONES DEL MOTOR 23
- CORDONES DE EXTENSIÓN 24
- CONTENIDO DE CARTON 25
- DESCRIPCIÓN FUNCIONAL 25
- ENSAMBLAJE 26
- DEL ORIFICIO PARA POLVO Y EL 27
- CONECTOR EN EL CUERPO DEL 27
- COLECTOR DE POLVO 27
- DE UNA MANGUERA DE 29
- ASPIRACIÓN EN EL 29
- DE LA BOLSA PARA POLVO EN EL 30
- OPERACIÓN 31
- UTILIZAR LA MAQUINA 32
- TRANSPORTE Y ALMACENAMIENTO 33
- MANTENIMIENTO 34
- LOCALIZACION DE FALLAS 34
- SERVICIO 35
- ACCESORIOS 35
- GARANTIA 35
- • DELTA SERVICE CENTERS 36
- • DELTA) 36
Manuais e produtos relacionados com Aspiradores Delta AP300
Aspiradores Delta 50-764 Manual do Utilizador
(48 páginas)
(48 páginas)
Philips AE6565/00 manuali
Manuali dei proprietari e guide per l'utente per Radio Philips AE6565/00.
We fornisce 2 manuali pdf Philips AE6565/00 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comentários a estes Manuais