Delta RMC101 Manual do Utilizador descarregar pdf (Página 738)

100

101

RMC100 and RMCWin User Manual

A-86

A.3.14 Command/Commanded Axes

In order to fit a single Event Step into eight words, the Command and Commanded Axes fields

share a single word. The Commanded Axes field is stored in the most significant byte. If all eight

bits are zero, the axis running the event sequence executes the command. Otherwise, the

command is issued to each axis that has its corresponding bit set (bits 0-7). The Command is

stored in the least significant byte:

Example

A Go (G) command needs to be issued to axes 0 and 1. Since the hexadecimal value for the Go

command is 0x47 (01000111 binary), then the bit map for the Command/Commanded Axes field

would be as follows:

Next convert this binary field to hexadecimal (0x0347) or decimal (839), and use it as the

Command Value in either a Event Step Edit or Event Step Transfer command.

A.3.15 LINK TYPE/NEXT

In order to fit a single Event Step into eight words, the Link Type and Link Next fields share a

single word. The Link Next field is stored in the most significant byte; the Link Type is stored in

the least significant byte:

Available Link Types

For an overview of all available link types and a list of all available link types organized by use,

see Link Types and Link Values.

1 2 ... 733 734 735 736 737 738 739 740 741 742 743 ... 950 951

Comentários a estes Manuais

Sem comentários

Delta RMC101 Manual do Utilizador Página 738

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Delta RMC101